Harken 35.2ST Winche - Manual (Page 10)

10 Radial Winch 35.2 ST Installation and Maintenance Manual
Carry out Procedure1 as shown in the paragraph on winch installation and then do the following:
6. Completely unscrew the three screws n°27
8. Slide out the central shaft n°19
10. Remove the drum support n°15
Important: washer n°12 may remain inside the
drum support!
7. Remove the self-tailing arm support n°21
and slide out the bushing
9. Unscrew the 6 hex screws n°16
( 8Nm/71 in-lb)
11. Remove the washer n°12