Hoefer SP-2001 Vision Life Spectrophotometer - Manual (Page 58)

Version 1.0
Page 58
ACCESSORIES INSTALLATION
Printer installation
1. REMOVE THE POWER CABLE FROM THE
INSTRUMENT. Turn the instrument over and
remove cap head screws from positions A and B
using the Allen wrench provided.
2. Turn the instrument back over and lift the
accessory cover vertically upwards to remove.
Remove the tie-wrap from the cable.
3. Plug the accessory cable into the printer, there is
a lug to show the correct way round.
4. Lower the printer onto the locating pins and push
down firmly. Turn the instrument over and
replace the cap head screws as per step 1.