Ch sel enter, English – Denon DVD-3910 User Manual

Page 10

Advertising

ENGLISH

(8) DENON Link connections

High quality digital sound with reduced digital signal transfer loss can be enjoyed by connecting a separately
sold DENON Link compatible AV amplifier.

AV-1

CH SEL
ENTER

DVD-3910

To power outlet

Front speaker (left)

Center speaker

Front speaker (right)

Subwoofer

Surround speaker (right)

AV amplifier with DENON Link input
terminals

Surround speaker (left)

DENON LINK

DENON LINK Second Edition:
• With the DENON LINK, Second Edition (2nd), the audio signals are transferred from the DVD player to the

AV amplifier in digital form, with the same quality as the signals recorded on the disc.

Digital transfer of the high quality multi-channel signals of DVD audio is possible for all discs. (A Second
Edition compatible DVD player and AV amplifier are required for this.)

Compatibility with previous models:

Digital audio signals output from a DENON LINK S.E. compatible DVD player can only be played on a
DENON LINK S.E. compatible AV amplifier (Playback with DENON LINK connections is not possible
when using a DENON LINK S.E. compatible DVD player in combination with an AV amplifier that is not
S.E. compatible.).

• “S.E.” is indicated on the rear panel’s DENON LINK connector on DENON LINK S.E. compatible products.

DENON LINK S.E. settings:
• At “DIGITAL INTERFACE SETUP” under “SETUP”, set “DENON LINK” to “2nd”. (See pages 18~20.)

If you connect the DENON LINK, set to “2nd”.

NOTES:
• When DENON LINK is set, the down-mixed audio signals are output only from the left and right terminals

and front left and front right terminals.
If you want to use the analog terminals set “DENON LINK” to “OFF”.

• When using the DENON LINK connector, the “AUDIO CHANNEL”, “DIGITAL OUTPUT”, “LPCM

(44.1kHz/48kHz)”, “SOURCE DIRECT” and “BASS ENHANCER” settings under “AUDIO SETUP” and the
“HDMI AUDIO SETUP” and the “IEEE1394” settings under “DIGITAL INTERFACE SETUP” in “SETUP”
cannot be made.
The digital output cannot be turned off even by setting “PURE DIRECT SELECT” to “ALL OFF” or
selecting a mode for which the digital output is set to off. (See page 26.)

• The DVD-3910’s speaker settings are invalidated when the DENON LINK connector is connected.
• When the DENON LINK 2nd connection, Super Audio CD’s signals are not output from the DENON LINK

connector. Please use the analog audio output terminals.

(9) IEEE 1394 connections

The simple connection of one IEEE 1394 cable permits high quality digital transfer of the following between
devices having IEEE 1394 connectors: the audio of DVD video, DVD audio that up until now could only be
connected by 5-conductor audio cable in an analog connection, or Super Audio CD and other multi-channel
audio. (unless DENON LINK connections)
(IEEE 1394 is an international standard established by the Institute of Electrical and Electronics Engineers, Inc.
of the U.S.)