Daewoo DCR-9120 - Manual (Page 8)

13
(Option 1) - Connecting your player through RF lead
Connecting your player through
extra equipment (satellite system)
12
(Option 1) - Connecting your player through RF lead
(Option 2) - Connecting your player through SCART lead
■ Before you start, unplug all the equipment from the mains supply.
Setting up your player
With this connection, if your player is receiving CH ARD and your TV is displaying CH3, when you press the [TV/VCR] button on
the remote control, your TV will automatically display the CH ARD. “VCR” will be displayed.
In this mode, to change the viewing channels the [PR/PRESET] buttons on the player remote need to be used. To switch off this
mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will get better pictures and sound
quality if you connect your player with a scart lead.
Television
Aerial
The type of aerial you should
use, depends on local
interference and how far you
are from the transmitter. You
should contact a local
retailer if you have any
questions about your aerial.
Back view of your player
200-240V~ AC
50/60Hz
Television
Aerial
Back view of your player
Scart lead (not supplied)
■ Before you start, unplug all the equipment from the mains supply.
Television
Aerial
Back view of your player
You can use this connection if your player has two scart sockets. This will improve sound and picture quality when you are
recording from satellite.
Satellite
Installation
200-240V~ AC
50/60Hz
200-240V~ AC
50/60Hz