Denon ASD-51N - Manual (Page 13)

ENGLISH

Get
ting Star
ted
Set
ting
Pla
ybac
k
Inf
or
mation
Tr
oubleshooting
Specifications
Connection to devices equipped with Dock Control
4
7*%&0
"6%*0 7*%&0
*/
"6%*0 %0$,
$0/530-
- 3
*/
R L
R L
4
7*%&0
7*%&0
*/
3&.05&
$0/530-
"6%*0
$0"9*"-
*/
Monitor Device equipped with DOCK CONTROL jack
b 4
AC 120 V, 60 Hz
(For U.S.A. &
Canada model)
AC 230 V, 50 Hz
(For Europe model)
AC outlet (wall)
Signal
direction
Audio signal
OUT IN
Video signal
OUT IN
or
b 1
b 1: After inserting the AC adapter plug into the wall
socket, turn the power operation switch on the
side panel to “ON/STANDBY” to power up the
ASD-51N. The power indicator then lights up, and
after 15-20 seconds the GUI screen is displayed
on the monitor.
b 2: Digital connection is possible using a commercially
available coaxial digital cable. When using the
digital output, you will need to perform settings
in the GUI menu “Setup” – “Other” – “Audio
Output” (vpage 16). The default setting is
“Analog”. Digital output is turned off.
NOTE
When making a digital connection to a DENON
amplifier released in 2009 or earlier, you should
not use the DOCK CONTROL jack.
b 3: Please use a commercially available monaural
mini-plug cable for the connection. Connect to
equipment that has a REMOTE CONTROL jack.
The ASD-51N receives remote control signals
from the connected equipment, and these signals
are sent to the equipment to operate it.
b 4: ASD-51N can be operated from a DENON amplifier
or DENON system device equipped with a DOCK
CONTROL jack connected to the ASD-51N.
Features may be limited, depending on the device
connected.
NOTE
When using the DOCK CONTROL jack, be sure to
make an analog connection.
Latest compatible lists
http://denon.com/asd-51/
NOTE
Connect the plug on the side
to which this part is mounted
to the terminal on the ASD-
51N.
The ASD-51N can be operated remotely using the supplied remote control. By connecting to your existing
equipment, you can play back your favourite music and video files from your iPod or from over a network.
b 3 b 2
(supplied)
(sold separately) (sold separately)
(supplied)
Connections
NOTE
When the DOCK CONTROL jack is connected,
the ASD-51N no longer accepts remote control
commands. To use the remote control unit, point it at
the remote control sensor on the connected device
when operating it. • Only connect equipment which is compatible with
the DOCK CONTROL jack to the DOCK CONTROL
jack of the ASD-51N. Connecting non-compatible
equipment will result in a malfunction. •