Denon ASD-51N - Manual (Page 18)

ENGLISH

Get
ting Star
ted
Connections
Pla
ybac
k
Inf
or
mation
Tr
oubleshooting
Specifications
Making Detailed Settings (Setup)
For details on how to select, set and cancel settings for each menu, see “GUI
Menu Operation” (vpage 9, 10).
Setting items Setting contents
Network Setup
(Continued)
If you are using a
broadband router
(DHCP function),
there is no need to
make the settings
at “IP Address”
and “Proxy”, since
the DHCP function
is set to “ON” in
the
ASD-51N’s
default settings.
If the ASD-51N
is
being used
connected to a
network without
the DHCP function,
the
network
settings must be
made. In this case,
some knowledge
of networks is
required.
For
details, consult
a network
administrator.
•
•
Network Setup
Up/Down Back/Select
IP Address
DHCP
192.168.11.3
ON
Exit
Detail
Detail
Up/Down Back/Select
IP Address
DHCP
192.168.011.003
OFF
Subnet Mask 255.255.255.0.
Default Gateway 000.000.000.000
Primary DNS 000.000.000.000
000.000.000.000 Secondary DNS
Proxy
q Select “Detail” and press ENTER .
w Use p to set “DHCP” to “OFF”, then press i .
The DHCP function is disabled.
e
Use uio p to input the address and press ENTER .
IP Address : Set the IP address within the ranges
shown below. The Network Audio function cannot be
used if other IP addresses are set.
CLASS A : 10.0.0.0 ~ 10.255.255.255
CLASS B : 172.16.0.0 ~ 172.31.255.255
CLASS C : 192.168.0.0 ~ 192.168.255.255
Subnet Mask : When connecting an xDSL modem
or terminal adapter directly to the ASD-51N, input the
subnet mask indicated in the documentation supplied
by your provider. Normally input 255.255.255.0.
Default Gateway : When connected to a gateway
(router), input its IP address. •
•
•
Make network settings.
Setting items Setting contents
Network Setup 1. Connect the LAN cable (vpage 7).
2. Turn on the ASD-51N (vpage 4, 6 b1 ).
ASD-51N performs automatic network setup due to
the DHCP function.
When connecting to a network that has no DHCP
function, perform the setting in step 3.
3. Set the IP address at the GUI menu “Setup”
– “Network” – “Network Setup”.
Making Detailed Settings (Setup)
DHCP (Dynamic Host Configuration Protocol)
These are systems by which the IP address and other network settings are
automatically set for the ASD-51N, computer, broadband router and network
devices.
q
w
e
Making the Network Settings
(Network)
Default settings are underlined.
Items that can be set with the “Setup” procedure n
Making the GUI settings (GUI)
v page 13
Making other settings (Other)
v page 14
Making language settings (Language)
v page 13
Making the network settings (Network)
v page 11
Set
ting