Hd4070 procedure, Ht4400 procedure, Hd4070 thc – Hypertherm THC Control Board Replacement User Manual
Page 7: Control pc board calibration
Advertising
![background image](/files/789576/content/doc007.png)
Page 4
128407 Kit Instructions
THC.108
HD4070 PROCEDURE
1.
Turn off the power to the power supply.
2.
Install the replacement PC board in to the power supply and attach all electrical connections.
3
Attach the volt meter to measure the arc voltage between power supply I/O board bus bars as shown
below.
HD4070 THC
Control PC Board Calibration
Set volt meter to
measure 100-500 VDC.
Advertising