Hypertherm Powermax190c Service Manual - Manual (Page 23)

2-4
powermax190
c Service Manual
SPECIFICATIONS
S MARK
The 230V Powermax190c system conforms to standard EN50192. The S mark indicates that the power
supply and torch are suitable for use in environments with increased hazard of electrical shock.
Direct current (DC).
Alternating current (AC).
Plasma cutting torch.
AC input power connection.
The terminal for the external protective (earthed) conductor.
An inverter-based power source.
Anode (+) work clamp.
Temperature switch.
Pressure switch.
Plasma torch in the TEST position (cooling and cutting gas exiting nozzle).
The power is on.
The power is off.
Volt/amp curve.