Product identification, Local codes, Safety information – Desa (V)V36EN-B User Manual

Page 3: Continued

Advertising
background image

111253-01E

For more information, visit www.desatech.com

For more information, visit www.desatech.com

3

3

5.

This fireplace reaches high temperatures. Keep children and
adults away from hot surfaces to avoid burns or clothing igni-
tion. Fireplace will remain hot for a time after shutdown. Al-
low surfaces to cool before touching.

6.

Carefully supervise young children when they are in the room
with fireplace.

7.

Do not modify this fireplace under any circumstances. Any
parts removed for servicing must be replaced prior to operat-
ing fireplace.

8.

Turn fireplace off and let cool before servicing, installing, or
repairing. Only a qualified service person should install, ser-
vice, or repair this fireplace. Have fireplace inspected annu-
ally by a qualified service person.

9.

You must keep control compartments, burners, and circulat-
ing air passages clean. More frequent cleaning may be needed
due to excessive lint and dust from carpeting, bedding mate-
rial, etc. Turn off the gas valve and pilot light before cleaning
fireplace.

10. Have venting system inspected annually by a qualified service

person. If needed, have venting system cleaned or repaired.
See Cleaning and Maintenance, page 27.

11. Keep the area around your fireplace clear of combustible ma-

terials, gasoline, and other flammable vapor and liquids. Do
not run fireplace where these are used or stored. Do not place
items such as clothing or decorations on or around fireplace.

12. Do not use this fireplace to cook food or burn paper or other

objects.

13. Do not use any solid fuels (wood, coal, paper, cardboard, etc.)

in this fireplace. Use only the gas type indicated on fireplace
nameplate.

14. This appliance, when installed, must be electrically grounded

in accordance with local codes or, in the absence of local codes,
with the National Electrical Code, ANSI/NFPA 70, or the Ca-
nadian Electrical Code, CSA C22.1.

15. Do not use fireplace if any part has been exposed to or under

water. Immediately call a qualified service person to arrange
for replacement of the unit.

16. Do not operate fireplace if any log is broken.
17. Do not use a blower insert, heat exchanger insert, or other ac-

cessory not approved for use with this fireplace.

18. Do not operate fireplace with glass door removed, cracked, or

broken.

19. Provide adequate clearances around air openings.

SAFETY INFORMATION

Continued

PRODUCT IDENTIFICATION

Figure 1 - Victorian Direct-Vent Fireplace with Electronic Ignition

LOCAL CODES

Install and use fireplace with care. Follow all local codes. In the
absence to local codes, use the current National Fuel Gas Code
ANSI Z223.1/NFPA 54
* (USA) or the current CSA-B149.1 Instal-
lation Code
(Canada).
*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

SAFETY INFORMATION

PRODUCT IDENTIFICATION

LOCAL CODES

Glass
Door
Assembly

Blower Switch
(Optional Installation)

Control
Valve

Log
Set

Grate
Assembly

Lava
Rock

Glowing
Embers

Upper Louver
Panel

Lower
Louver
Panel

Flue Collar

Nailing
Flange

ON/OFF/REMOTE Switch
(Optional Installation)

Advertising