Hyundai 2010 Santa Fe - Manual (Page 376)

7 57
Maintenance
1. Open the hood.
2. Loosen the retaining bolts and remove
the headlight assembly from the body
of the vehicle.
3. Disconnect the power connector from
the back of the headlight assembly.
4. Remove the headlight bulb cover by
turning it counterclockwise.
5. Disconnect the headlight bulb socket-
connector.
6. Unsnap the headlight bulb retaining
wire by depressing the end and push-
ing it upward (High beam).
7. Remove the bulb from the headlight
assembly.
8. Install a new headlight bulb and snap
the headlight bulb retaining wire into
position by aligning the wire with the
groove on the bulb (High beam).
9. Connect the headlight bulb socket
connector.
10. Install the headlight bulb cover by
turning it clockwise.
11. Connect the power connector to the
back of the headlight assembly.
12. Reinstall the headlight assembly to
the body of the vehicle.
✽ ✽ NOTICE
If the headlight aiming adjustment is
necessary after the headlight assembly is
reinstalled, consult an authorized
HYUNDAI dealer.
OCM070051L OCM070050L