IBASE MI805 - Manual (Page 7)

INTRODUCTION
MI805 User’s Manual 3
MI805 Specifications
Product Name MI805F-D
Form Factor Mini-ITX
SoC
Type/Speed Intel® Celeron® QC J1900 /2MB L2 cache/2.0 GHz [TDP=10W]
Package = FCBGA1170,Type-3, 25mmx27mm, 22nm
BIOS AMI BIOS
Memory 2 xDDR3 SO-DIMM sockets [Horizontal type]
Maximum to DDR3L-1333@8GB (Non-ECC, Unbuffered, 1.35V)
Display Intel® Gen7 w/ 4EUs graphics engine
Supports DX 11, OGL 3.0, OCL 1.1, OGLES 2.0,
CRT x1; DVI-D x1
LVDS 24-bit dual channel via NXP PTN3460 thru eDP
LAN Intel I211-AT PCIe Gigabit LAN x 2
USB Intel® Atom TM SoC built-in USB 3.0, supports 1 port, Edge I/O
Intel® Celeron® SoC built-in USB 2.0 host controller, support 7 ports
- 2 ports in the rear panel
- 2 ports thru Mini PCIe slot (Full-sized#1 / Half-sized)
- 2 ports thru onboard pin-header thru USB 2.0 hub (SMSC
USB2514)
- 1 port compatible with USB3.0 port
Serial ATA Intel® Atom TM SoC built-in SATA II controller, supports 2 ports
Audio Realtek ALC269QHD Codec w/class-D speaker amplifier (2W per
channel @ 5V power supply) ; support 2-channel audio out + amp
LPC I/O Nuvoton NCT6106D / [128-pin LQFP, 14x14x1.4mm]
- COM #1 (RS232/422/485) support ring-in with power @500 mA
(selectable for 5V or 12V) [SP339EER1 232/422/485 transceiver for
jumper-less]
- Com #2 (RS232 only), supports ring-in with power @500 mA
(selectable for 5V or 12V), with SP3243EBER
- COM #3~COM #6 (RS232 only) with SP3243EBER
[Hardware Monitor]
2x thermal inputs; 2 x Voltage monitoring
2x fan header, 1x CPU fan (PWM), 1x system fan (DC mode)
Digital IO 4-in / 4-out (User configurable)
Expansion
Slots PCIe (1x) slot x 1
Full-sized Mini-PCIe x 2 [Mounting holes for full-sized (x2)+half-sized
(x1)]
MiniPCIe #1 support PCIe(1x)/USB signal
Mini-PCIe #2 support mSATA only (Share with SATA #1)
Edge
Connector
DC Jack x 1(refer to IB902, C1213512DCSC03000P)
Dual DB9 Stack connector x1 for COM#1 / COM#2
DB15 + DVI-D stack connector x 1 for CRT + DVI-D
Dual USB + RJ45 stack connector x 1 for USB2.0 + LAN
USB 3.0 vertical connector x1
Single RJ-45 connector x1 (C1213811RJ4514401P)
Audio 3-port connector x1 (Line-out, Line-in, MIC)
Onboard
Header/
Connector 2x4 pins header x2 for USB 4 ports (2.54 pitch type)
2x6 pins header x1 for front audio (2.54 pitch type)
DF11-10 pins box header x4 for COM # 3~# 6
DF20 socket connector x 2 for 24-bit dual channel LVDS
4 pins box header x1 for LCD backlight control (PWM mode only)
SATA connector x2 for SATA II device
4-pin power connector x 2 for SATA device
2x5 pins header x 1 for Digital I/O (2.54 pitch type)
4-pin header for speaker out (from ALC269 internal amplifier)
2x4 pins header x1 for front I/O panel (2.54 pitch type)
2 x 2 pins connector x1 for 12V power-in