IBASE ET950 - Manual (Page 31)

BIOS SETUP
ET950 User’s Manual 27
Graphics Configuration
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
Graphics Configuration
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
IGFX VBIOS Version 2179
IGfx Frequency 800 MHz
Primary Display
Primary PEG
Primary PCIE
Auto
Auto
Auto
Internal Graphics Auto
Aperture Size 256MB
DVMT Pre-Allocated 32M
DVMT Total Gfx Mem
Primary IGFX Boot Display
LVDS / EDP Control
Gfx Low power mode
Panel Power Enabled
256MB
VBIOS Default
Disabled
Enabled
Disabled
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary
display or select SG for switchable Gfx.
Primary PEG
Select PEGO/PEG1/PEG2/PEG3 Graphics device should be Primary
PEG.
Primary PCIE
Select PCIE0/PCIE1/PCIE2/PCIE3/PCIE4/PCIE5/PCIE6PCIE7
Graphics device should be primary PCIE.
Internal Graphics
Keep IGD enabled based on the setup options.
DVMT Total Gfx Mem
Select DVMT 5.0 total graphics memory size used by the internal
graphics device.