IBASE IB980 - Manual (Page 45)

BIOS SETUP
IB980 User’s Manual
43
Device power-up delay
Maximum time the device will take before it properly reports itself to the
Host Controller.
‘Auto’ uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken from Hub descriptor.
F81846 Super IO Configuration
Aptio Setup Utility
Main
Advanced
Chipset Boot Security Save & Exit
Super IO Configuration
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
F81846 Super IO Chip F81846D
Standby Power on S5 All Enable
► Serial Port 1 Configuration
► Serial Port 2 Configuration
► Serial Port 3 Configuration
► Serial Port 4 Configuration
► Parallel Port Configuration
Serial Port Configuration
Set Parameters of Serial Ports. User can Enable/Disable the serial port
and Select an optimal settings for the Super IO Device.
Standby Power on S5
[ All Enable] Provide the Standby Power for devices.[All Disable] Shutdown the
Standby power.
Parallel Port Configuration
Set parameters of Parallel port (LPT/LPTE)