IBASE SMARC-EVK1 - Manual (Page 3)

3
3 IBASE Technology Inc.
Quick Start Guide
Here is a step by step guide to boot up your SMARC:
a. By default, the (Android) or (Linux OS) has been preloaded in the eMMC, (or SD card)
of the SMARC demo kit. All you have to do is
 - Connect your SMARC with TV/LCD by using an HDMI cable,
 - Or connect your LVDS panel by using LVDS cable if you have them
 - Connect the device with 12V power input directly.
b. To make a recovery SD card, please refer to Chapter 2.
c. To use the root/ serial port debug function, please check Chepter3.2.1 (COM1 debug
cable setup) information.
d. To boot up with an installed LVDS panel, please refer to Chapter 3.
Note: different LVDS panel will has different customization, please check with your sales.
e. For advanced users who would be building their own products, please refer to
Chapter 3~5.
f. For special requests or assistance, please contact IBASE Sales.