IBASE SI-102-N - Manual (Page 49)

Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
47 IBASE Technology Inc.
Wall Mounting Requirements
Note: Before mounting the system onto the wall, ensure that you are following all
applicable building and electric codes.
When mounting, ensure that you have enough room for power and signal cable
routing and have good ventilation for power adapter. The method of mounting must
be able to support the weight of SI-102-424 plus the suspend weight of all the
cables to be attached to the system. Use the following methods for mounting your
system:
Mounting to hollow walls
 Method 1: Wood surface – A minimum wood thickness – 38mm (1.5in.) by
25.4 cm (10in.) – of high, construction – grade wood is recommended.
Note: This method provides the most reliable attachment of the unit with
little risk that the unit will come loose or require ongoing maintenance.

Method 2: Drywall walls - Drywall over wood studs is acceptable.
Mounting to a solid concrete or brick wall - Mounts on a flat smooth surface.
Selecting the Location
Plan the mounting location thoroughly. Locations such as walkway areas, hallways,
and crowded areas are not recommended. Mount the unit to a flat, sturdy,
structurally sound column or wall surface.
The best mounting surface is a standard countertop, cabinet, table, or other
structure that is minimally the width and length of the unit. This recommendation
reduces the risk that someone may accidentally walk into and damage the device.
Local laws governing the safety of individuals might require this type of
consideration.