IBASE SI-12 - Manual (Page 22)

14 SI-12 User Manual
2.2 Installing the Memory
The IB812 board supports two DDR3L memory sockets for maximum total memory of
16GB DDR3L memory type.
Installing and Removing Memory Modules
To install the DDR3L modules, locate the memory slot on the board and perform the
following steps:
1. Hold the DDR3L module so that the key of the DDR3L module aligned with that on
the memory slot.
2. Gently push the DDR3L module in an upright position until the clips of the slot
close to hold the DDR3L module in place when the DDR3L module touches the
bottom of the slot.
3. To remove the DDR3L module, press the clips with both hands.
J6: Primary DDR3L SO-DIMM Socket
J12: Secondary DDR3L SO-DIMM Socket