2 installations, 1 installing the memory – IBASE SI-32-N User Manual
Page 21
Advertising
Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
13
IBASE Technology Inc.
2.2 Installations
2.2.1 Installing the Memory
The IB939 board supports two DDR3 memory socket for a maximum total memory of
8GB in DDR3 1600 memory type.
Installing and Removing Memory Modules
To install DDR3 modules, locate the memory socket on the board and perform the
following steps:
1. Hold the DDR3 module so that the keys of the DDR3 module align with those on the
memory slot.
2. Gently push the DDR3 module in an angle as shown in the picture below until the
clips of the sockets lock to hold the DDR3 module in place when the DDR3 module
touches the bottom of the socket.
3. To remove the DDR3 module, press the clips with both hands.
Advertising