IBASE SI-83 - Manual (Page 48)

40 SI-83 User Manual
Graphics Configuration
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
Graphics Configuration
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
IGFX VBIOS Version 2167
IGfx Frequency 800 MHz
Graphics Turbo IMON Current 31
Primary Display
Primary PEG
Primary PCIE
Auto
Auto
Auto
Internal Graphics Auto
Aperture Size 256MB
DVMT Pre-Allocated 32M
DVMT Total Gfx Mem
Gfx Low Power Mode
256MB
Enabled
Panel Power Enable Disabled
Graphics Turbo IMON Current
Graphics turbo Imon current values supported (14-31)
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or select SG for
switchable Gfx.
Primary PEG
Select PEGO/PEG1/PEG2/PEG3 Graphics device should be Primary PEG.
Primary PCIE
Select PCIE0/PCIE1/PCIE2/PCIE3/PCIE4/PCIE5/PCIE6PCIE7 Graphics device should be
primary PCIE.
Internal Graphics
Keep IGD enabled based on the setup options.