IHSE USA 437 Series DDXi DVI/VGA Extender - Manual (Page 33)

DEVICE CONTROL
33
Tools
Use the Tools menu to set the position and size of the OSD window, adjust
the sharpness for a fixed resolution setting, set the color depth, reset the
Extender system to its factory default settings or provide a test pattern.
Figure 16 Tools menu
OSD
Use the OSD submenu to define the position and size of the OSD window.
To view this menu, select the Tools icon from the main menu and then
select the OSD icon.
Figure 17 OSD submenu
Set the position of the OSD window (see
OSD
, page 37)
Reset Extender to factory default settings
Adjust sharpness (fixed resolution modes
only). When resolution is changed by an
imposed fixed resolution, sharpness can be
affected. Use this option to switch between
three settings for optimum sharpness
Select color depth
(see Color Depth, page 39)
Choose whether to automatically
adjust pixels per line and pixel
phase after a mode change
(see Factory Reset
Use the Factory Reset
submenu to reset the unit to
factory defaults, save user
presets or restore user
Manually adjust the horizontal position of
the OSD window
Manually adjust the vertical position of the
OSD window
Back to Tools menu
Toggle the size of the OSD window
between single and double size
Display a ‘burst’ pattern at the
remote console for monitor setup
(see Monitor Setup, page 42)