General operation, Xdma6415 operation – Dual XDMA6415 User Manual

Page 6

Advertising
background image

6

XDMA6415

 OPERATION

Faceplate Removal

Semi-Permanent 

Faceplate Installation

Power On/Off

Mode

Auxiliary Input

Steering Wheel 

Input Interface

Volume

Programmable 

Turn-On Volume

Mute

Preset EQ Curves

Display

General Operation

Press RELEASE and pull away from the left side to remove.

To re-install, insert right side of faceplate first then push

left side to secure.

Remove trim ring and install supplied #1 x 7/32” Phillips

head screw through left side of mounting frame into faceplate.

Press POWER or any other button (except eject) to turn the

unit on. Inserting a disc will turn the unit on automatically.

Press POWER to turn the unit off.

Press MODE to select between AM/FM, CD player, auxiliary

input, iPod, Bluetooth and USB. Modes of operation are

indicated in the display. CD mode will not appear unless a CD

is inserted.

Insert a 3.5mm connector in the front panel AUX port.

Connect the other end of the 3.5mm connector to the

headphone output of an audio device, MP3 player, etc. Press

MODE to select AUX mode.

The steering wheel interface input located on the back of

the head unit allows connection to the Pacific Accessory 

Corporation (PAC) SWI-PS interface module (sold separately).

Visit www.pac-audio.com for details.

To configure steering wheel controls, follow the instructions

provided with the PAC SWI-PS interface module. After

installing the interface module, insert the module's 3.5mm

jack into the port on the back of the head unit.

Adjust volume using the volume knob (00-46).

Press and hold POWER for 3 seconds to program currently

selected volume level. "P-VOL" and the current volume level

will momentarily appear in the display.

Press       to silence the audio. “MUTE” will flash in the

display. Press       again to cancel.

On the remote control, press EQ to select between POP,

JAZZ, CLASSIC, BEAT, ROCK and OFF (default) equalization

curves. Any adjustment to the Bass or Treble settings

automatically cancels the current EQ curve (if one is

selected).

Press DISP to select between clock and different types of

information, such as radio frequency, CD track/elapsed time,

or MP3/WMA song information.

Advertising