Dual XDMA6415 - Manual (Page 9)

9
XDMA6415 OPERATION
Seek Tuning
Manual Tuning
Scan Tuning
Band
Storing and Recalling
Station Presets
Automatically Store
Stations
Preset Scan
Press TUNE nn or TUNE ll momentarily to seek the
next strong station.
Press TUNE
nn
or TUNE
ll
for more than two seconds,
then release. "MANUAL" will momentarily appear in the
display. Press TUNE
nn
or TUNE
ll
momentarily to
move radio frequency up or down one step at a time. Press
and hold to advance quickly. If tuning is not adjusted for five
seconds, the unit will return to seek tuning mode (default).
"AUTO" will momentarily appear in the display.
On the remote control, press SCAN to preview strong
stations on the current band, pausing for five seconds at
each. Press SCAN again to cancel.
Press BAND to select between FM1, FM2, FM3, AM1 and
AM2 bands.
Up to 18 FM stations and 12 AM stations can be stored. To
store a station, select the desired band and station. Press
and hold the desired preset button (1-6) for more than
two seconds. When stored, the preset number will appear in
the display. The station can be recalled anytime by pressing
the corresponding preset button.
Note: Function keys 7, 8, 9 and 0 on the remote control apply
to Bluetooth operation only.
Press AS/PS for more than two seconds to automatically
store the six strongest stations in the current band.
Automatic local tuning is activated during the initial band
scan.
Press AS/PS for less than two seconds to scan presets 1-6
on the current band, pausing for five seconds at each. Press
AS/PS again to cancel.
AM/FM Tuner Operation