Inova Labs XYC100B-SPT Quick Start - Manual (Page 7)

7
3. Place the nasal cannula in your nose and breathe normally. The unit
detects when you begin to take a breath and delivers oxygen in PULSE-
WAVE™ doses. Because this type of delivery is very gentle, you may
not feel the pulse of oxygen. To verify that oxygen is being delivered,
reference the LED above your selected Pulse Setting. This LED will flash
every time a breath is detected and a bolus of oxygen is delivered.
4. To recharge the unit and/or External Battery*, you can use the AC
or DC Adapter/Charger. Connect the adapter to the connector
port on the unit and the charger to a source of electricity.
5. To turn the unit off, press and hold the Power Button for 2
seconds until the green Power LED light and the unit shut off. The
internal fans may continue to operate for an additional period
of time until the temperature inside the unit is sufficiently cooled.
* If an External Battery was purchased, please refer to the Operator’s Manual for detailed charging and
operating instructions.
** Based on Breaths Per Minute.
Battery Life Timetable
Battery Type e
Pulse Setting
1 LPMeq 2 LPMeq 3 LPMeq
Internal Battery**
Sport Model
Pro Model
5.5 Hours 4 Hours 3.25 Hours
12.5 Hours 7.25 Hours 6.25 Hours
External Battery** All Models 3 Hours 3 Hours 2 Hours