Jetway Computer NF9KC - Manual (Page 45)

40
This function is only supported when ERP function is disabled.
► System Agent (SA) Configuration
► Graphics Configuration
Press [Enter] to further setting graphics configuration.
Enable PEG
The optional settings are: [Disabled]; [Enabled]; [Auto].
GTT Size
The optional settings are: [1MB]; [2MB].
Aperture Size
The optional settings are: [128MB]; [256MB]; [512MB].
DVMT Pre-Allocated
Use this item to select DVMT 5.0 pre-allocated (fixed) graphics memory size used
by the internal graphics device.
The optional settings are: [32M]; [64M]; [96M]; [128M]; [160M]; [192M]; [224M];
[256M]; [288M]; [320M]; [352M]; [384M]; [416M]; [448M]; [480M]; [512M]; [1024M]
DVMT Total Gfx Mem
Use this item to select DVMT 5.0 total graphics memory size used by the internal
graphics device.
The optional settings are: [128M]; [256M]; [MAX].
Primary IGFX Boot Display
Use this item to select the video device which will be activated during POST. This
has no effect if external graphics present.
Secondary boot display selection will appear based on your selection. VGA modes
will be supported only on primary display.