Jetway Computer NC9I - Manual (Page 39)

34
Use this item to configure the USB 2.0 controller in HiSpeed(480Mbps) or
FullSpeed(12Mbps).
The settings are: [FullSpeed]; [HiSpeed].
USB Keyboard Legacy/Mouse Legacy /Storage Legacy Support
Use these items to enable or disable legacy support for USB keyboard/mouse/ mass
storage devices. The optional settings are: [Enabled], [Disabled].
3-7-3 Onboard Super IO Function
Serial Port 1/2 Address
This item allows BIOS to select base addresses for serial port 1/2.
Serial Port 2 RS485 Select
The optional settings
are：[Disabled(RS232)]; [Enabled(RS485)].
Parallel Port Address