Jetway Computer NC9I - Manual (Page 40)

35
Use this item to allow BIOS to select parallel port base adresses.
Parallel Port Mode
The optional settings are: [Normal]; [Bi-Directional]; [ECP]; [EPP]; [ECP & EPP].
Serial Port 3/4/5/6 Address
This item allows BIOS to select base addresses for serial port 3/4/5/6.
Serial Port 3/4/5/6 IRQ
This item allows BIOS to select serial port 3/4/5/6 IRQ.
Watchdog Timer Select
This item is used to activate the watchdog function. The optional settings are: [Enabled];
[Disabled].
When set as Enabled, The following sub-items shall appear:
WatchDog Timer Val
User can type a number in the range of 4 to 255.
WatchDog Timer Unit
The optional settings are: [Sec.]; [Min.].
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most
effectively save energy saving while operating in a manner consistent with your own
style of computer use.