JLCooper ES-SloMoJ - Manual (Page 43)

43
Clip Transfer Protocol
The ES-SloMoJ can transfer cue information in one of two
protocols:
Ash Vale SM-2a
ES-SloMoJ
The SM-2a protocol is:
The port settings are:
38400 bits/sec, no parity, 8 data bits, 1 stop bit.
The data format is
0Dh 0Ah <Cue#> 20h <Time>
:
0Dh 0Ah <Cue#> 20h <Time>
0Dh 0Ah @
The ES-SloMoJ protocol is:
The port settings are:
38400 bits/sec, no parity, 8 data bits, 1 stop bit.
The data format is
0Dh 0Dh 0Ah <Cue#> 20h <StartTime> 20h <EndTime>
20h <n
1
> <n
0
>
:
0Dh 0Dh 0Ah <Cue#> 20h <StartTime> 20h <EndTime>
20h <n
1
> <n
0
>
0Dh 0Dh 0Ah @
Cue# is a three digit ASCII value (000 to 999 or 000 to 399) that
specifies the cue location.