D-Link DI-524UP - Manual (Page 46)

42
Advanced > QoS > Physical Port
To enable QoS per port, first click the Physical Port radio button which will reveal the
preceeding window for the user to configure. Simply click the Enable check box of the
corresponding port to enable QoS. You may also set the bandwidth for that port by
using that corresponding pull-down menu. The user may choose a bandwidth between
128 Kbps
to 32 Mbps. FULL denotes that the port will have the maximum transfer speed
allowed at any given time, up to 100Mbps. Click Apply to confirm your settings.