Kanguru e-Flash - Manual (Page 10)

10
9. Remove one PCI SLOT cover from a PCI bay.
10. Insert the Power Over eSATA bracket into the open PCI bay and fasten it in place using the
screw provided.
11. Make sure all cables are securely connected, and then replace the computer’s casing.
Your power over eSATA bracket is now ready for use.
Note: If you regularly use more than one desktop computer, you can purchase more Power Over
eSATA brackets and cables for installation on all your systems. You can also purchase a Power Over
eSATA ExpressCard, which will provide you with a Power Over eSATA port on your laptop computer.
For more information, please contact Kanguru Solutions Sales at 1-888-KANGURU.
Connecting and Using Your Kanguru eFlash