Kanguru Copy Dock - Manual (Page 11)

11
Backup
3.1 Backup
To create your backup job:
1. Click on the “Create backup files” icon or click on the “Backup” tab from the Welcome screen
to create and configure your backup job.
2. Under the “Source Directories” window,
select the directories that contain the data
that you want to backup. Selected directories
will be designated with a check mark.
3. In the “Destination Drive” field, enter the
location of the destination drive where
you will save your backed up files. The
destination drive should be the drive inserted
in the Kanguru Dock.
4. Click on the Backup button to begin the
backup process.
5. After the backup process has completed you
can click on the Exit button.
After you have setup your backup job, you can simply press the “Backup” button located on the front
of your Kanguru Dock any time you want to execute the backup job.
Note: For onte touch backup to work, your computer and the dock must both be powered on and
connected through a USB cable. Also, the Kanguru OTB icon must appear in the Windows Taskbar.
If the Kanguru OTB icon does not appear in your Windows Taskbar, click on Start -> Programs ->
Kanguru Solutions -> Kanguru OTB