Kanguru QS2 DVDRW - Manual (Page 8)

8
2.2 Use with Macintosh OS X 10.3 and later
Mac OS X 10.3 and later have a built-in driver to support the Kanguru DVDRW. Simply plug in the
Kanguru DVDRW to your Mac and the operating system will automatically install the necessary
driver. Once the driver has been installed a CD/DVD icon will appear on your desktop whenever a
CD or DVD is inserted into the drive.
Note: The CD or DVD icon will only appear on your desktop when a CD or DVD is inserted in the
drive. You will not see a CD or DVD drive icon on your desktop if there’s no CD or DVD present.
To properly eject a disc from the drive, drag the CD/DVD icon from your desktop to the trash bin. This
will safely eject the disc from the drive. Once the dic has been removed you can safely disconnect
your Kanguru DVDRW. Your system may freeze up or give you an error message if you remove the
device without properly stopping it first.
WARNING! Do not unplug the Kanguru DVDRW from the USB port of your computer or hub while
copying files to or from the device or while files or applications stored on the Kanguru DVDRW are
in use. DOING SO MAY RESULT IN LOSS OF DATA.
General Operation