Dual XDM7615 - Manual (Page 12)

12
XDM7615 OPERATION
CD Player Operation - MP3/WMA Files
Press SEARCH for more than 3 seconds, then release.
“MP3 T
*
" or “WMA T
*
” will flash in the display. Use the
buttons in the above table (3 keystroke maximum input),
or the rotary encoder to enter the desired file number.
Press to confirm the selected file number or wait for
the input cycle to time out (approximately 5 seconds).
If the file is not available, “NO FILE” will be displayed
momentarily and the current file will continue to play.
Press SEARCH for more than 3 seconds, then release.
Press SEARCH again to navigate files/folders on the disc.
The current folder name will scroll one time followed by
available files and folders.
Turn the rotary encoder to preview files/folders in the
current folder. If a folder is selected, the icon will
illuminate.
Press to select the desired file or folder. If a folder is
selected, "
/ /
" will be displayed. Turn the rotary encoder to
the right to begin searching files in the folder.
Press to select the desired file within the folder.
When navigating folders (and “
/ /
“ is displayed), press AUDIO
to access the previous level (up one level).
*Only available on MP3/WMA discs recorded with more than
one folder.
Direct File Select
Step 1
Step 2
File/Folder Navigate
Step 1
Step 2
Step 3
Step 4
*Folder Access
(Up one level)
Refer to the following button function table when selecting, searching or
navigating MP3/WMA files and folders: