Dual XDM7615 - Manual (Page 8)

8
XDM7615 OPERATION
Press AUDIO momentarily to select between Volume
(default), Bass, Treble, Balance, Fader and *Subwoofer.
Press AUDIO until BAS appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Press AUDIO until TRE appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Press AUDIO until BAL appears then rotate encoder
left/right to adjust (BAL L 12-BAL 00-BAL R 12).
BAL 00 represents equal balance
Press AUDIO until FAD appears then rotate encoder
left/right to adjust (FAD F 12-FAD 00-FAD R 12).
FAD 00 represents equal fader
Press AUDIO until SUB appears then rotate encoder
left/right to adjust (0 minimum / +12 maximum).
Note:
Subwoofer option must be enabled before it will appear in
the audio menu. Refer to page 7 for details.
Individual Bass and Treble settings are retained in memory
for AM, FM, CD or AUX modes. This allows you to save the
Bass and Treble settings separately for each mode.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Audio
Bass
Treble
Balance
Fader
Subwoofer
Source Audio Memory
General Operation
BASS VOLUME TREBLE BALANCE FADER *SUBWOOFER