Kemppi ADF filter for Beta - Manual (Page 2)

When fitted to a suitable face shield that meets the necessary
and local safety standards, this Auto-Darkening filter is suitable for
welding and grinding process. It is not suitable for laser welding and
oxyacetylene welding/cutting processes.
• Never place the Auto-Darkening filter on a hot surface.
• Never open or tamper with the Auto-Darkening filter.
• This filter will not protect against explosive devices or corrosive
liquids.
• Do not make any modifications to the filter, unless specified in
this manual.
• Do not use replacement parts, other than those specified in
this manual. Unauthorized
• modifications and replacement parts will void the warranty
and may expose the operator to unnecessary risk of personal
injury.
• Should this filter not darken at arc ignition, stop welding
immediately and contact your supervisor or your dealer.
• Do not immerse the filter in water.
• Do not use any solvents on the filter screen.
• Use only at temperatures: -10°C ~ +55°C (14°F ~ 131°F).
• Storage temperature: -20°C ~ +70°C (- 4°F ~ 158°F). The filter
should be stored in dry, cool and dark area. If the filter in not to
be used for prolonged periods, remove the battery.
• Protect the filter from contact with liquids and dirt.
• Clean the filter surface regularly. Do not use strong cleaning
solutions. Always keep the sensors and solar cells clean, using a
clean lint-free tissue.
• Regularly replace worn/cracked/scratched/pitted front cover
lenses.
• Materials which may come into contact with the wearer’s skin
can cause allergic reactions in some circumstances.
INSTRUCTIONS FOR USE
WARNING! Before using the helmet for welding,
ensure that you have read and understood the
safety instructions.