Kleenmaid DCTBBQ - Manual (Page 6)

6
1 2 3
4 5 7 8 9 10 11 6
Legend
1 ON/OFF
2 Increase/decrease timer minutes (from 0 to 99)
3 Increase/decrease the temperature of the oil in
°C (from 40 to 200)
4 Operating indicator light
5 Display the oil temperature
6 Indicator that the set temperature has been
reached
7 Timer running light
8 Timer display
9 Start timer
10 Lock keypad
11 Lock keypad indicator light
Touch Control Instructions
Barbecue (Fig. 1)/Fryer (Fig. 2):
Power-on (barbecue)
1 Touch the button (1) to turn on the control: the level
indicator (5) displays “00” and the LED (4) is on.
2 Press the next button within 10 seconds or the device
will automatically turn off.
Power-on (fryer)
1 Touch the button (1) to turn on the control: the level
indicator (5) displays “000” and the led (4) is on.
2 Press the next button within 10 seconds or the device
will automatically turn off.
Operating indicator light (barbecue)
When you turn on the control with the button (1), the
operating indicator light (4) turns on and stays on until
you touch the button (1) again.
Operating indicator lights (fryer)
When you turn on the control with the button (1), the
operating indicator light (4) turns on and stays on until
you touch the button (1) again.
In addition, when you set a certain temperature level,
the indicator light (6) flashes until the oil reaches the
temperature setting; when the temperature setting is
reached, the indicator light stays on without flashing.
Power control (barbecue)
1 Use the “+” and “-” buttons (3) to adjust the power
between level 0 and level 12. Holding down one of
these buttons, lowers or raises the level setting.
Temperature control (fryer)
1 Use the “+” and “-” buttons (3) to adjust the temperature
of the oil from 80 °C to 200 °C. The temperature can
be changed in steps of 10 °C. Holding down one of
these buttons, lowers or raises the level setting.
Turning off the heating element (barbecue/fryer)
1 Lower the setting to 0 using the “-” button (3). The
heating element will turn off after 3 seconds.
Press the “+” and “-” buttons at the same time (3).
Fast turn-off of the heating elements (barbecue/
fryer)
1 To turn the heating element off automatically, press
the “+” and “-” buttons (3) at the same time.
Residual heat (“H”) indicator (barbecue/fryer)
When the appliance is off, the display (5) shows the
symbol “H” (residual heat).
This indicator will remain on for about 40 minutes.
Turning off the appliance (barbecue/fryer)
The appliance can be turned off at any time using the
on/off button (1)
Locking the keypad (key) (barbecue/fryer)
1 The entire appliance can be locked with the keypad
lock or button (10) to prevent unintended operation.
This function also protects children. As long as the
lock is active, touching the buttons has no effect
except to turn off the appliance (1). When the lock is
active, the LED (11) remains lit.
Safety power-off (barbecue/fryer)
1 If the heating element is inadvertently turned on,
the control system automatically turns it off after
the power-on limit has elapsed. In this case, “H” is
displayed. The power-on limit varies depending on
the level set at that time and varies proportionally
from a minimum of 1 hour at the maximum level, to a
maximum of 6 hours at the minimum level.
Fig. 2a