Kleenmaid VC320 - Manual (Page 2)

KLEENMAID VC32O
Please read this instruction manual before assembling the vacuum cleaner
and keep it in the attachment compartment for reference.
CAUTION – Safety advice
This is an electrical appliance.
Disconnect from mains before changing bag or filters.
– only connect to mains outlets which correspond with the data
label in the attachment compartment,
– do not expose to liquid or moisture,
– vacuum dry surfaces only,
– the hose and handle contain electrical parts,
– children must be strictly supervised,
– do not vacuum hot material such as ash,
– do not vacuum humans or animals,
– no user serviceable internal parts,
– only use genuine KLEENMAID replacement items,
– do not wash filters,
– do not re-use bags,
– pull out cable fully for prolonged use,
– the appliance is not intended for use by young children or infirm persons
without supervision,
– young children should be supervised to ensure that they do not play with
the appliance.
The warranty will be invalidated if the above advice is ignored.
IT IS THE USERS RESPONSIBILITY TO OPERATE THIS APPLIANCE SAFELY
AND CAREFULLY
Pay attention to the safety advice.
Your KLEENMAID cylinder vacuum cleaner is designed and made in
Germany to the highest technical standards. Microfilters provide high
filtration. It is efficient and ergonomic. It anticipates the future and is up-
gradeable. It follows easily and gives effective furniture protection. The
advanced design of the handle with built in power control combines comfort
with practicality.
Assembling the vacuum cleaner
In the box you will find the machine, the hose with handle, the telescopic
tube and the combination nozzle.
Push the neck (1) of the hose into the suction opening (2) of the vacuum,
ensuring that the remote control power plug is aligned with the socket. Fit
the combination nozzle (4) to the smooth telescopic tube (5) and the handle
(6) to the ratcheted tube. Ensure the locking catches are located in the holes
in the tubes.