Kleenmaid VC320 - Manual (Page 4)

Telescopic tube, attachment and combination nozzle
To adjust the telescopic tube ( 5 ) use the slide button ( 7). The catches ( 8 )
release the handle and combination nozzle. The latter can be adjusted for
carpet and hard floor with the pedal ( 9 ).
To open the attachment compartment (10 ) press the button in the carrying
handle recess (11 ). The attachments fit both the handle ( 6 ) and the teles-
copic tube (5 ).
When the machine is horizontal the telescopic tube with the combination
nozzle can be parked in the groove (12 ) at the back of the machine. When
vertical, use the side groove (13 ).
The KLEENMAID air belt
Your KLEENMAID cylinder vacuum cleaner has a unique of bumper (14 )
which protects your walls and furniture. The microfiltered exhaust air is dis-
sipated round the air belt. The air belt can easily be changed. Take the clip
(16 ) off and remove the textile cover (15 ). The foam part (17 ) stays on the
machine. To fit the new air belt, slot the side rails into the grooves (18 ). Start
at the back and proceed round the machine. Secure the ends with the clip
(16 ).
Never operate the machine without an air belt (15 ).
Using the machine
Before connecting the plug, pull the cable (19) fully out. The cable rewind
is operated by the rewind button (20). Before rewinding the cable always
switch off and unplug the machine.
The main switch (21) turns the machine on, indicated by the green light
(22). The machine can be switched to standby mode with the power
adjustment slider (23). The green light will stay on until the machine is
switched off at the main switch (21). The standby mode is for short inter-
ruptions. For longer interruptions, always turn off at the main switch and
unplug.
For optimal carpet cleaning the machine can be used with power brush.
The plug contacts to the socket (24) and fits to the neck of the hose.
Use the socket (24) for power brushes up to 150 W only.
Bag light (orange)
The orange bag light (25) indicates a full bag or blockage in the hose or tube.
The light only works correctly at full power, at lower, power levels the bag
light might indicate incorrectly. Check status regularly at full power.