Cleaning and maintenance – Kleenmaid KED600 User Manual

Page 23

Advertising
background image

After each use clean the filter, located in the inner

part of the door.

Lift the filter lid.

Pull your fingers over the filter to remove fibres

and threads lining. Replace the filter cover (it must

snap in place at the bottom).

If required, clean also the filter housing.

If the filter is clogged in such way that it needs

washing, pull it out from its bed, wash under hot

water and dry. Be sure that the replaced filter snaps

safely to its position, and only then close the filter

lid.

If the filter is not regularly cleaned, the

airflow is obstructed, which causes longer

drying time and danger of overheating.

Empty the container and occasionally

clean the water condensation device.

Emptying the water container

Empty the container after every drying procedure:

pull the container out, pull out the draining nozzle,

pour out the water and replace the container.

Water from condenser tank is not

drinkable!

22

23

Cleaning and maintenance

Cleaning the filter

Cleaning the

condensation dryer

Advertising
This manual is related to the following products: