Installation and connection – Kleenmaid KED600 User Manual

Page 8

Advertising
background image

Packaging materials are environmentally friendly:

they can either be recycled, safely disposed of or

destroyed without any threat to the environment.

To be able to do this effectively all materials are

marked accordingly.

Be careful not to damage cabinet of

the appliance with a sharp object when

removing the packaging.

Ventilation slots and openings on the appliance

front and rear wall should not be obstructed.

Do not place the appliance in a room where there

is danger of freezing.

Location should be adequately ventilated. Room

temperature should always be between 0°C and

25°C as frozen water in the condensation water

receptacle or in the pump may damage the dryer.

Appliance can either stand on its own or can be

placed on top of a washing machine of the same

dimensions - minimum width 517 mm, depth

476 mm. The surface for placing the dryer must

be clean and flat. Use supplied vacuum feet to

prevent sliding of the appliance. Washing machine

hardtop must be wooden or metallic. To conceal

the opening between the two appliances, a

decorative trim (DECPL) is available. To order call

your nearest Kleenmaid Store on 13 13 08.

Do not place the appliance behind lockable

door, sliding door, and door with hinges on

the opposite side of the appliance.

Place the appliance in the room in such

a way to ensure free opening of the dryer

door.

8

9

Installation and connection

Removing wrapping

Selecting the

appropriate location of

the appliance

Installation

Advertising
This manual is related to the following products: