Denso BHT-7000 - Manual (Page 124)

108
Reload the battery
to restart!
E:xxxxxxxx-F:xxxxxxxx
1:xxxxxxxx-2:xxxxxxxx
P:xxxxxxxx-R:xxxxxxxx
Your settings in
System Mode
have been lost.
Will reset
to defaults.
Error in System Mode settings
■ Problem
Your settings made in System Mode contain an er-
ror.
If this error occurs, the System Mode settings
revert to the factory defaults.
The BHT-7000 displays this error for three
seconds and then displays the "No execution
program selected…" message.
■ Solution
Make your settings in System Mode again.
System down error
■ Problem
An error has occurred during execution of System
Program.
If this error occurs, the BHT-7000 beeps five
times (for 0.1 second per beep).
■ Solution
Unload and reload the battery cartridge, then turn
on the power.
If this error occurs frequently, make a note of the
message and codes on the LCD and contact your
nearest dealer.