TTI TCB-881 - Manual (Page 13)

ENGLISH
Note :
1. Use Channel Selector to selecte the main menu features
such as Beep Tone, Time-out Timer, Scan Receive Timer,
Scan Delay Timer, Backlight Dimmer and Backlight Timer.
2. Use AM/FM button to enter value setting level.
3. Use Channel Selector to select or change any value that you
like to have while the values are blinking.
4. Use SCAN button to return to the previous main menu
features.
5. Press Lock button or PTT button of the Microphone to
complete the selections and changes and return to the
stand-by mode. Or the selections and changes will be
automatically confirmed after 5 seconds of the selections
and changes. Using Scan button to return to the previous
main menu features will be accompanied by the automatic
confirmation of the selected values and changes.
8. How to Operate the Transceiver
1) Make sure the microphone is connected to the
microphone jack.
2) Make sure the power cable is connected properly.
3) Make sure the antenna is connected to the antenna
receptacle.
4) It is better to put the squelch control knob turned fully
counter-clockwise.
5) Turn on the transceiver and control the volume level.
6) Adjust the squelch control knob to the optimum level.
7) Select your desired channel.
8) To transmit, press the PTT button and speak to the
microphone.
9) Release the PTT button to receive.
13 TCB-881