Dixon 1998 - Manual (Page 16)

CONTROLS:
BLADE DRIVE:
Located on control panel, on operator's right.
To engage the mower blades, move switch to
the rear and lift.
To disengage blades, move switch backward.
Switch is clearly marked "on and off".
CIRCUIT BREAKER:
Protection of the electrical system is by
(1)15 amp circuit breaker.
If circuit breaker trips, push button to reset.
If this condition repeats, consult dealer for
inspection and repair.
MOWER DECK CUT HEIGHT LIFT LEVER:
Located to the left of operator.
Controls the cutting height. Seven
positions of adjustment. Move lever in
and forward to lower. Move lever in
and back to raise. NOTE: Always use
high for transport.
Page 13