Dixon 1998 - Manual (Page 32)

CARE AND MAINTENANCE
OIL FILL:
1. Push the valve body in
and twist into the detent
notch.
2. Clean any spilled oil
from engine and
chassis.
NOTE:
3. Refill engine with type, and quantity of oil recommended by the engine
manufacturer in engine literature.
Oil changes require replacement of the oil filters. These filters can be obtained from
your authorized engine dealer.
The use of any other oil filter may cause damage to the engine.
Model ZTR 4515B
Briggs & Stratton Oil Filter: P/N 492 932
Model ZTR 4515K
Kohler Oil Filter: P/N 52 050 02
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS. -
PROTECT YOUR ENVIRONMENT-
LUBRICATION:
CHASSIS: LOCATIONS:
SERVICE INTERVALS:
RECOMMENDED GREASE:
Number of grease zerks used: (4)
(1) each front wheel caster tube and each front wheel hub.
Every 50 hours of operation
Name brand wheel bearing or multi-purpose grease
Lubricate each front wheel to allow even distribution of grease
within the wheel, rotate or spin each front wheel after (3) pumps
of the grease gun. Repeat process until the appearance of
grease is noted completely around each caster axle.
Page 29