La Crosse Technology 616-146a - Manual (Page 3)

3
Features
Projects time & indoor temp. on wall or ceiling
Projection rotates in 90 degree increments
Projection options: (1) Default: toggle between time and indoor temp.,
(2) time only, or (3) indoor temperature only
Time zones: Atlantic Time (AST), Eastern Time (EST), Central Time (CST), Mountain Time (MST),
Pacific Time (PST), Alaskan Time (AKT) & Hawaiian Time (HAT)
Light up display backlight with a press of a button using battery power OR continuous light with AC
adapter (ON /OFF option)
Backlight settings: High, Low and Off
Charge devices with USB charging port: Output 0.5A
Atomic time and date sets itself
12/24 hour time with minutes
Snooze alarm and alarm icon
Calendar: day, date
IN temperature (°F / °C) with trend arrow
Moon Phase
Low battery icon for clock
Sits on desktop or tabletop
5.0V AC adapter (included) for primary power and battery backup
Battery life is over 24 months when using the AC adapter
Initial Setup
1. Insert A/C adapter into the wall outlet then into the display or insert 2 AAA batteries (not included)
into the display (see Power the Atomic Projection Alarm). The Atomic Projection Alarm will light up
and display time and indoor temperature.
IMPORTANT: When operating on a/c power, the backlight, projection and USB charging port will turn off
while the Projection Alarm searches for the WWVB signal, to avoid interference. The backlight and
projection will return after the 2-10 minute search. Then the USB charging port will resume working.
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
Power the Atomic Projection Alarm
The Projection Alarm can be powered by the 5-volt a/c adapter or by 2 AAA batteries.
A/C power adapter:
Insert enclosed 5-volt a/c power adapter into a wall outlet, then into the Atomic Projection Alarm.
Battery
Compartment
5-Volt a/c adapter