La Crosse Technology WS-9121 - Manual (Page 7)

44
batteries to the Temperature Station (see “How to install and
replace batteries in the Temperature station” below). Once the
batteries are in place, all segments of the LCD will light up briefly.
Following the indoor temperature and the time as 0:00 will be
displayed. If they are not shown in LCD after 60 seconds, remove
the batteries and wait for at least 60 seconds before reinserting
them. Once the indoor data is displayed user may proceed to the
next step.
3. After the batteries are inserted, the Temperature Station will start
receiving data signal from the transmitter. The outdoor
temperature should then be displayed on the Temperature