La Crosse Technology WS-9170U-IT User Manual

Page 3

Advertising
background image

9

OPEN / CLOSE WINDOW ADVICE

On two sides of the ambient change icons are OPEN and CLOSE window indicators. The open/close

window advice is based on the ambient temperature and humidity data.

3 options of recommended actions: ‘Open window’, ‘Close window’, no action.

Depending on the comfort level and the ambient change conditions, the ‘Open window’ and ‘Close
window’ icons will be shown according to the table below:

Humidity comfort level





Ambient change

Open window
icon

Close window
icon

Comfort

More Dry or More Wet or No change

Off Off

Between comfort & dry

More Dry or More Wet or No change

Off Off

Between comfort & wet

More Dry or More Wet or No change

Off Off

Dry

No change

Off

Off

Dry More

Wet On

Off

Dry

More Dry

Off

On

Wet No

change Off

Off

Wet More

Wet Off

On

Wet More

Dry On

Off

10

Note:
Under the following conditions, the ambient change indicator and OPEN/CLOSE window advice will not
be displayed:

Indoor and/or outdoor temperature display “OFL”.

Indoor and/or outdoor humidity display “- -“.

No outdoor transmitter signal.

TO VIEW MIN/MAX DATA

Press shortly the MIN/MAX key several times to view sequentially the indoor minimum/maximum
temperature/humidity, and outdoor minimum/maximum data.







Maximum

icon

Minimum

icon

Indoor data

11










TO RESET MIN/MAX DATA

Press and hold MIN/MAX key for 3 seconds to reset ALL the indoor, outdoor temperature and
humidity records to current readings.

TEMPERATURE DISPLAY

Press the ºC Key to change temperature display unit to degree Celsius.
Press the ºF Key to display degree Farenheit.

Maximum

icon

Minimum

icon

Outdoor data

12

ABOUT THE THERMO-HYGRO TRANSMITTER

The temperature may affect the range of the thermo-hygro transmitter. At cold temperatures the
transmitting distance may be decreased. Please bear this in mind when positioning the transmitter. Also
the batteries may be reduced in power for the thermo-hygro transmitter.

CHECKING FOR 915MHz RECEPTION

If the outdoor temperature and humidity data are not received within 3 minutes after set up (or
OUTDOOR display always shows “- -” during normal operation), please check the following points:
1.

The distance of the weather station or transmitter should be at least 5 to 6.5 feet (1.5 -2 meters)
away from any interfering sources such as computer monitors or TV sets.

2.

Avoid placing the transmitter onto or in the immediate proximity of metal window frames.

3.

Using other electrical products such as headphones or speakers operating on the 915MHz-signal
frequency may prevent correct signal transmission or reception.

4.

Neighbors using electrical devices operating on the 915MHz-signal frequency can also cause
interference.

Note:

When the 915MHz signal is received correctly, do not re-open the battery cover of either the

transmitter or weather station, as the batteries may spring free from the contacts and force a false reset.
Should this happen reset all units (see “Set up” above) otherwise transmission problems may occur.

The transmission range is around 330 feet (100 meters) from the thermo-hygro transmitter to the
weather station (in open space). However, this depends on the surrounding environment and
interference levels. If no reception is possible despite the observation of these factors, all system units
have to be reset (see “Set up” above).

Advertising