System settings – LD Systems WS 1000 G2 User Manual
Page 16
16
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ESP
AÑOL
POLSKI
IT
ALIANO
SYSTEM SETTINGS:
2
2
3
1
ASC (frequency synchronisation via infrared)
The transmission frequency of a wireless system has to be the same in both transmitter and receiver.
Once a specific frequency (group and channel) has been selected, the transmitter (handheld or bodypack) has to
be synchronized to the same frequency (group and channel) via the ASC function.
Push the ASC button
1
on the receiver (the ASC symbol in the display blinks), switch on the transmitter and hold
it with its infrared interface
2
facing direct to the infrared interface of the receiver in a distance between 5 and
20 cm (within 10 seconds after switching the transmitter on). After a short moment the synchronisation process
is done and the RF signal level meter
3
of the receiver indicates a signal.