Legrand OR-205KAN9GB-MM User Manual
Page 54
Advertising
Page 47
Installation on jacketed fiber using preset cleaver
OptiMo Connector Installation Instructions
13
Press the buffer into place on the cleaver, and cleave the fiber 7 mm from the end of the buffer. Be sure
to read and understand the operating instructions included with the cleaver. Using tweezers, discard
waste fiber into the proper waste container.
*
If unfamiliar with cleaving, it is advised to practice using a spare piece of fiber. Generally, a light touch is all that is required to
score the fiber. The fiber buffer must rest against the stop.
*
Alternative cleavers which produce a 7 mm bare fiber length may be used.
+0.5
-0.0
Fiber waste
Advertising
This manual is related to the following products:
- OR-205KAN9GA-MM OR-205KAN9GB-SM OR-205KAN9GA-SM OR-60300128 OR-60300126 OR-205KAN9FB-MM OR-205KAN9FA-MM OR-205KAN9FB-SM OR-205KAN9FA-SM OR-205KAN9EB-MM OR-205KAN9EA-MM OR-205KAN9EBSM OR-205KAN9EA-SM OR-205KAS9GB-50T OR-205KAS9GA-50T OR-205KAS9GB-62 OR-205KAS9GA-62 OR-205KAS9GB-09 OR-205KAS9GA-09 OR-205KAS9FB-50T OR-205KAS9FA-50T OR-205KAS9FB-62 OR-205KAS9FA-62 OR-205KAS9FB-09 OR-205KAS9FA-09 OR-205KAS9EB-50T OR-205KAS9EA-50T OR-205KAS9EB-62 OR-205KAS9EA-62 OR-205KAS9EB-09 OR-205KAS9EA-09