Legrand CRFB Series Floor Box User Manual

Page 3

Advertising

9. 8CT and 8CTC COVERS: Open the lid and insert Cover

Attachment Screws through Sealing Washers and attach
Cover Flange to CRFB4 Box.

Attachment

Screw

Sealing

Washer

CAUTION: CRFB4 Floor Box has two sets of Cover

Attachment Holes. Use the attachment
holes closest to the mounting screw.

10. FOR 8CT FLUSH STYLE COVERS INSTALLED IN WOOD FLOORS: Create a pocket 9-3/8" diameter

[283mm] x 7/32" [5.6mm] deep, concentric with mounting hole from step 1. Place gasket (supplied with
cover) in counterbore and attach cover. Apply sealant between edge of hole and flange.

Apply Sealant

or Grout

Gasket

9 3/8" [238mm]

Counterbore

7/32" [5.6mm]

Deep

11. For factory wired CRFB4 access floor boxes, use

Installation Instructions supplied with Walkerflex

Modular Wiring Systems.

CAUTION: Do not make or break connections

while circuits are energized.

Mounting Hole

Remove this Tab
Section to mount
8CT & 8CTC Covers

Advertising

This manual is related to the following products:

CRFB, CRFB-SR1-1, CRFB-SR2-2, CRFB-SR1-3, CRFB-SR1-2, CRFB-B-1, CRFB-B-2, CRFB-B-3, CRFB-SR1-4, CRFB-BEZ6A-4, CRFB-B-4, CRFB-6COM-4, CRFB-D-4, CRFB-GFI-4, CRFB-AB-3, CRFB-AB-1, CRFB-RT-1, CRFB-RT-3, CRFB-AB-2, CRFB-RT-2, CRFB-D-2, CRFB-D-3, CRFB-D-1, CRFB-MAAP-4, 8CTBK, 8CTBZTR, 8CTBZ, 8CTBSTR, 8CTBS, 8CTNKTR, 8CTNK, 8CTGYTR, 8CTGY, 8CTBKTR, CRFB-GFI-1, CRFB-GFI-2, CRFB-GFI-3, CRFBBTCBS, CRFBBTCBK, CRFBBTCBKTR, CRFBBTCBSTR, CRFBBTCNK, CRFBBTCNKTR, CRFBBTCBZ, CRFBBTCBZTR, CRFBBTCGY, CRFBBTCGYTR, CRFB-TUN, CRFB4, EFB10-6AB, EFB10-DP, EFB10-AAP, EFB10-MAAP, EFB10-3S2, EFB10-MB, EFB-B, EFBCMG, EFBCLL, EFB-MAAP, EFB-AAP, EFB-MOS, EFB6-MB, EFB6-DIV, EFB6-TUN, EFB610-CTR, EFB610-TS, EFB-50A, EFB810-TUN, EFB8-MB, EFB8S-22GMB, EFB810-DIV

Popular Brands

Popular manuals