DYSON DCO3 - Manual (Page 2)

Wand
Shroud
Brush
control
system
Cover cap/
storage hook
Fit adaptor tool
to reverse wand
Cable winder
Hose
Blockage removal
cassette
Bin release catch
Fit tools to hose for
car cleaning or reversed
wand for confined areas
Push button to release
or replace wand
On/off
switch
Tool location
Cable life
extender
(where fitted)
Lower cable winder
Wand
release catch
Post-motor filter
Twist ring
Quick release
window
Bin inner
Cyclone
assembly
Cyclone
release catch
Blockage removal
cassette catch
DCO3 quick reference page
Carrying
handle
(NEUTRAL) OFF for cleaning delicate rugs and floors.
Select manually (NEUTRAL). Return to (PARK) position
after use.
(PARK) OFF for when the cleaner is left running in the
upright position and when the hose is in use.
(DRIVE) ON for carpet cleaning.
The brush control system is a simple device to allow cleaning of hard
floors by switching off the brushbar. The height adjusts automatically.
Brush control system
THE SAFETY ALERT RATCHET NOISE WARNS THAT THE BRUSHBAR IS OBSTRUCTED
Pre-motor filter
Soleplate
Cone seal
b c a