Legrand RFB Series Floor Boxes - Manual (Page 5)

5
Step 13. RFB4KIT Furniture Feed Barrier Kit for use with Evolution
6CFFTC Furniture Feed Activation on RFB4E floor box.
Step 13A. Insert lower barrier into floor box and fasten with
two (2) #8-32 x 3/16" screws removed from base.
NOTE: Power feed compartment is only supplied along
the side perpendicular to the top plate hold
down screw.
Step 13B. Attach upper barrier to 6CFFTC Furniture Feed
Cover Flange with two (2) #8-32 screws. Secure
ground wire to underside of flange.
RFB4KIT Lower Partition
Two (2) #8-32 mounting
Screws (from base)
Top Plate Hold Down
Power Feed Compartment
Step 13C. Complete installation following directions provided
with Evolution 6CFFTC Furniture Feed Activation.
RFB4KIT Upper Partition
Two (2) #8-32 Screws
Attach ground wire with
ground Screw